2011

Table Of Contents
DescriptionCommand
Inserts extra wire numbers anywhere on a wire
network. These copies follow the network's
Copy Wire Number
AECOPYWIRENO
main wire number attribute. If AutoCAD Elec-
trical modifies it, then any wire number copies
on the network also update. Extra wire num-
bers go on their own layer that is defined in
the Define Layers dialog box. If you assign a
color to this layer that is different than the
normal wire number and fixed wire number
layers, then it is easy to tell them apart from
the network's main wire number.
Inserts extra wire numbers such that they ap-
pear in-line with the wire rather than above
Copy Wire Number (In-
Line)
or below the wire. These copies follow the
network's main wire number attribute; if
AECOPYWIRENOIL
AutoCAD Electrical modifies it then any wire
number copies on the network also update.
Extra wire numbers go on their own layer that
is defined in the Define Layers dialog box. If
you assign a color to this layer that is different
than the normal wire number and fixed wire
number layers, then it is easy to tell them apart
from the network's main wire number.
Adjusts the gap between the wire and the wire
number text of wire numbers that are in-line
with the wire.
Adjust In-Line Wire/Label
Gap
AEWIRELABELGAP
Moves an existing wire number from one
segment of the network to another.
Move Wire Number
AEMOVEWIRENO
Lengthens a wire until it meets another wire
or an AutoCAD Electrical component.
Stretch Wire
AESTRETCTWIRE
54 | Chapter 1 AutoCAD Electrical What's New