2011

Table Of Contents
Displays the circuit elements for the selected circuit for configur-
ing. The tree structure is created dynamically based on the circuit
template. Select a circuit element to configure it.
Circuit Elements
Select the options for the highlighted circuit element.Select
NOTE The displayed options, along with default values, are
defined in the circuit builder spreadsheet.
Enter device annotation values, rung spacing, and wire type for
the circuit.
Setup & Annotation
NOTE The displayed values for the circuit are based on a motor
or load lookup in the electrical standards database.
Inserts only the highlighted circuit element.
Inserts all the circuit elements up to and including the
highlighted circuit element.
Inserts all the circuit elements.
Reverses the most recently inserted circuit element.
Displays the Select Motor or Select Load dialog box. Use this
dialog box to specify settings by selecting from a list of predefined
parameters.
Motor or Load Setup
Temporarily closes the dialog box so that you can select an exist-
ing motor or power feed and reuse the existing values.
Motor or Load Setup
Use Circuit Builder | 709