2011

Table Of Contents
Click to insert all the circuit elements.
NOTE If the circuit contains a nested template, go back and configure the
circuit elements in the nested template.
17 Select Done. The circuit is finalized by:
Remaining untagged child components are matched up with parent
components and tags are assigned.
The selection information for the circuit is applied to the main
component of the circuit.
The remaining marker blocks are removed from the circuit template
for any circuit elements not inserted.
Configure a dual one-line circuit
NOTE Add the one-line library search path on page 204 to the project so Circuit
Builder can find the one-line circuit templates. By default, the one-line library is
installed in a 1- folder under the schematic library folder.
1 Click Schematic tab Insert Components panel Circuit Builder
drop-down Circuit Builder.
2 Select the circuit from the Circuits list. For example:
Circuits: One-line Motor Circuit, Vertical - Dual FVNR - non reversing
NOTE You can also select History to display the list of previously inserted
circuits.
3 (Optional) Enter a Circuit Scale. This value sets an insertion scale value
for the circuit template.
4 (Optional) Enter a Component Scale. This value sets an insertion scale
value for the individual components inserted while building the circuit.
Use Circuit Builder | 703