2011

Table Of Contents
3 (Optional) Enter a Circuit Scale. This value sets an insertion scale value
for the circuit template.
4 (Optional) Enter a Component Scale. This value sets an insertion scale
value for the individual components inserted while building the circuit.
5 (Optional) Select to apply some specific annotation:
Presets on page 2072 - defined in the ANNO_CODE sheet of the Circuit
Builder spreadsheet file that map to the selected circuit.
Reference an existing circuit on page 723 - reference values from an
existing circuit selected from a list of circuits extracted from the active
project. The state of the Retag new components controls the retagging
of the components within the new circuit. Values can include catalog
assignment, component descriptions, annotation values, and more.
NOTE This option is not available if the circuit is selected from the History
list.
6 Select Configure.
7 Select an insertion point location on the drawing. The template drawing
for the selected circuit is inserted at the specified location. The template
drawing contains marker blocks, with instructions for building the circuit,
and the circuit wiring.
The dialog box has three sections, Circuit Elements, Select, and Setup &
Annotations. The options differ depending on the circuit and circuit
element selected.
8 Select a circuit element, for example:
Circuit Elements: Motor Setup
9
Click the Motor Setup Browse button to display the Select Motor
dialog box. This dialog box is where you select the motor and horsepower
or KW size from the electrical standards database. For other components,
the Catalog lookup dialog box displays. You can also type in values for
each entry.
10
Click the Wire Setup Browse button to display the Wire Size Lookup
dialog box. This dialog box is where you select or adjust the wire size
Use Circuit Builder | 701