2011

Table Of Contents
DescriptionCommand
Inserts an angled tee connection symbol at a
manually drawn wire intersection. You cannot
Insert Angled Tee Mark-
ers
insert a tee connection symbol into empty
space. If present, this replaces an existing wire
connection dot with a tee connection symbol.
AEANGLETEE
Edit Wires/Wire Numbers panel
DescriptionCommand
Allows manual edit of an existing wire number
or insert of a new one if none exists.
Edit Wire Number
AEEDITWIRENO
Fixes all or many wire numbers on a drawing
at their current values. Fixing a wire number
Fix Wire Numbers
AEFIXWIRENO
means that the wire number tag is left un-
changed if later processed or reprocessed by
the automatic wire numbering utility.
Swaps wire numbers between two wire net-
works.
Swap Wire Numbers
AESWAPWIRENO
Finds and replaces wire number text values or
substrings within those values. You can do this
Find/Replace Wire Num-
bers
on the active drawing or across the project
drawing set.
AEFINDWIRENO
Moves the wire number to a special hide layer
so that the number is no longer visible on the
Hide Wire Numbers
AEHIDEWIRENO
screen. The new hide layer is created from the
wire number layer name with a _HIDE suffix.
For example, if the wire number text layer is
called WIRENO then the hide layer name is
called WIRENO_HIDE. The layer is created
automatically when needed and you are asked
if you want to freeze this layer.
52 | Chapter 1 AutoCAD Electrical What's New