2011

NOTE If the circuit contains a nested template you, go back and configure
the circuit elements in the nested template.
18 Select Done. The circuit is finalized by:
■ Remaining untagged child components are matched up with parent
components and tags are assigned.
■ The selection information for the circuit is applied to the main
component of the circuit.
■ The remaining marker blocks are removed from the circuit template
for any circuit elements not inserted.
Insert a one-line circuit
Builds a one-line circuit based on your selection from a list of available circuits
and circuit elements.
Circuit Builder builds the circuit dynamically and annotates the circuit.
Annotation values are extracted from a database based on engineering
standards, motor horsepower, and supply voltage.
NOTE Add the one-line library search path on page 204 to the project so Circuit
Builder can find the one-line circuit templates. By default, the one-line library is
installed in a 1- folder under the schematic library folder.
1 Click Schematic tab ➤ Insert Components panel ➤ Circuit Builder
drop-down ➤ Circuit Builder.
2 Select a one-line circuit from the Circuits list. For example:
Circuits: One-line Motor Circuit, Vertical - FVNR - non reversing.
NOTE You can also select History to display the list of previously inserted
circuits.
3 (Optional) Enter a Circuit Scale. This value sets an insertion scale value
for the circuit template.
4 (Optional) Enter a Component Scale. This value sets an insertion scale
value for the individual components inserted while building the circuit.
Use Circuit Builder | 699