2011

the retagging of the components within the new circuit. Values can
include catalog assignment, component descriptions, annotation
values, and more.
NOTE This option is not available if the circuit is selected from the History
list.
8 Select Configure.
9 Select an insertion point location on the drawing. The template drawing
for the selected circuit is inserted at the specified location. The template
drawing contains marker blocks. Each block is marked with a code value
that links to instructions for either inserting a component, wire number,
or adjusting the wiring of the circuit.
The dialog box has three sections, Circuit Elements, Select, and Setup &
Annotations. The options differ depending on the circuit and circuit
element selected.
10 Select a circuit element, for example:
Circuit Elements: Motor Setup
11
Click the Motor Setup Browse button to display the Select Motor
dialog box. This dialog box is where you select the motor and horsepower
or KW size from the electrical standards database. For other components,
the Catalog lookup dialog box displays. You can also type in values for
each entry.
12
Click the Wire Setup Browse button to display the Wire Size Lookup
dialog box. This dialog box is where you select or adjust the wire size
based on an analysis of the load and various installation parameters. You
can also type in values for each entry.
13 Select a circuit element, for example:
Circuit Elements: Disconnecting means
The options for this circuit element, defined in the circuit builder
spreadsheet, are displayed in the Select section.
14 Select the options for this circuit element, for example:
Main Disconnect: Circuit breaker
Include N.O. auxiliary contact: Yes
Use Circuit Builder | 691