2011

these annotation values from a database based on engineering standards,
motor horsepower, and supply voltage.
1 Click Schematic tab ➤ Insert Components panel ➤ Circuit Builder
drop-down ➤ Circuit Builder.
2 Select the circuit from the Circuits list. For example:
Circuits: 3ph Motor Circuit, Horizontal - FVNR - non reversing
NOTE You can also select History to display the list of previously configured
circuits.
A circuit inserted from the Circuits list contains all default circuit elements
as defined in the circuit template and circuit builder spreadsheet. See
Set
circuit element defaults
on page 2075 to change the default circuit setup.
A circuit inserted from the History list contains all circuit elements and
values of the previously configured on page 690 circuit.
3 (Optional) Enter a Circuit Scale. This value sets an insertion scale value
for the circuit template drawing.
4 (Optional) Enter a Component Scale. This value sets an insertion scale
value for the individual components inserted while building the circuit.
5 (Optional) Enter a Horizontal Rung Spacing.
6 (Optional) Enter a Vertical Rung Spacing.
7 (Optional) Select to apply some specific annotation:
■
Presets on page 2072 - defined in the ANNO_CODE sheet of the Circuit
Builder spreadsheet file that map to the selected circuit.
Use Circuit Builder | 689