2011

Table Of Contents
Contains the values used to populate the Select Load on page
711 dialog box. This table name can have an optional suffix to
relate it to a specific electrical standards code.
FEED
Options tables contain values defining defaults and options lists
specific to an electrical standard. For example, default to copper
wiring, AWG size standard, and feet for conductor length units.
OPT
Wire ampacity tables contain the ampacity ratings for different
conductor sizes and insulation temperature ratings.
AMP_{wire type}_{wire size stand-
ard}
Grounding conductor sizing tables contain the maximum ampa-
city ratings for different grounding conductor sizes. This inform-
AMPG_{wire type}_{wire size stand-
ard}
ation is used to retrieve the minimum grounding conductor size
and provide a selection list of larger sizes.
Wire insulation tables lists the insulation types, the maximum
temperature rating for each, and de-rating factors for each based
on a series of temperatures.
INSUL_{wire type}_{wire size stand-
ard}
Conductor Reactance/AC Resistance tables contain values used
to estimate single-phase and three-phase voltage drop values.
XL&R_{wire type}_{wire size stand-
ard}
Conduit/raceway descriptions list used with the XL&R_{wire
type}_{wire size standard} tables.
XL&R_DESC
Fill tables contain the ampacity de-rating factors used when
there is more than one current carrying conductor (power wiring,
FILL
not ground, neutral, or control wires) in the same conduit, duct,
or raceway.
Lists the component type descriptions whose sizing ties directly
into the full load amps value (FLA) of the motor or load. The
MOTOR_I_DESC
CODE value maps to the MOTOR_I_CALC and MOTOR_I_MAP
tables.
Lists the formula to calculate the maximum amp value for various
types of components on a per motor type basis.
MOTOR_I_CALC
Maps the calculated FLA for a component to a specific rating
value and an optional catalog assignment.
MOTOR_I_MAP
Electrical standards database file | 665