2011

Table Of Contents
Specifies the insertion point offset distance
between one in-line device and the next.
Spacing between multiple devices
Spreadsheet/Table Columns
Displays the Spreadsheet to PLC I/O Drawing Generator dialog box for
reviewing and mapping spreadsheet columns to attributes on the PLC module
symbol.
Drawing Template
You can force the tool to use a specific template for new drawings. Enter the
template drawing file name with the full path or click Browse to search for an
existing template (it looks in the AutoCAD template folder where all of the
user drawing templates are saved). For the current default template, leave the
value blank. If you do not want to use a template drawing, enter a single dot
in the edit box.
NOTE Make sure that your template does not have any existing ladders.
Save
Saves the spreadsheet information in a .wdi file to reuse. Once you save the
new .wdi file, the Spreadsheet to PLC I/O Utility dialog box redisplays and
the new .wdi file name displays in the Settings edit box.
Create PLC spreadsheets using RSLogix
RSLogix is a PLC programming software package for programming various
Allen-Bradley PLCs. This program has an output function that can write the
I/O information out to an ASCII file. AutoCAD Electrical imports this
information and creates a regular spreadsheet from the data that can then be
used to create PLC drawing files.
Using the RSLogix 500 Import dialog box, you can omit PLC cards, reserve
future locations for PLC cards in drawings, and browse to select a PLC code
from the PLC database. Once you modify the .eas file and apply the PLC data
to categories you can save the data into a PLC import spreadsheet that is used
to create the PLC drawing files.
Create PLC spreadsheets using RSLogix | 639