2011

■ 1 = inserted near the right or bottom bus
line of the ladder.
■ 2 = inserted near the left or top bus line of
the ladder.
■ 3 = inserted centered between the bus lines
of the ladder.
The following are optional parameters for parametric build symbol placement:
Box color/linetype/layer
You can instruct AutoCAD Electrical to draw the rectangular box using
non-default line properties for color, layer, linetype, or ltscale. Encode this
information as a series of keywords as if you were using the CHPROP command
in AutoCAD to make the change. The keywords are encoded into the
"BOX_RIGHT", "BOX_LEFT", "BOX_TOP" and "BOX_BOTTOM" entries in the
specification table of a module. For example, the following makes the left and
right-hand sides of the enclosing box cyan using linetype 'Hidden2' and the
top and bottom blue using the default linetype:
BOX_RIGHT=0.5 COLOR CYAN LTYPE HIDDEN2
BOX_LEFT=0.5 COLOR CYAN LTYPE HIDDEN2
BOX_TOP=0.5 COLOR BLUE
BOX_BOTTOM=0.375 COLOR BLUE
Module Terminal Information table (ends with _Data)
Example: "allen-bradley_1746_analog_input_Data"
This file contains terminal information for the module type.
Catalog number of the moduleCODE
Terminal sequence numberSEQUENCE
Block name used for insertion. The "?" gets filled in during inser-
tion and the block name uses either a "H" or "V" depending on
the selected orientation.
BLOCK
Optional attributes for the terminal. Includes user attributes, %%x
prompt values, address prefix or suffix, non-sequential addresses,
ATTRIBUTES
598 | Chapter 8 PLC