2011

Table Of Contents
DescriptionCommand
Generates PLC I/O modules on demand, in a
variety of different graphical styles via a para-
Insert PLC (Parametric)
AEPLCP
metric generation technique. It is driven by a
database file (ace_plc.mdb) and a handful of
library symbol blocks.
Inserts PLC I/O modules that are fixed library
symbol blocks.
Insert PLC (Full Units)
AEPLC
Draws a dashed box around selected compon-
ents. A description can be assigned to the box,
Location Box
AELOCATIONBOX
and components within the box can have their
location and installation code(s) changed.
Inserts location marks on symbols that are
identified with location code in text form.
Location Symbols
AELOCATIONSYMBOL
Generates a connector symbol from user-
defined parameters. The symbol is created on
Insert Connector
AECONNECTOR
the fly, and inserted as a block insert into your
active drawing file. Since these are created on
an as-needed based, it eliminates the need for
you to create and maintain a library of connect-
or symbols.
Imports a connector wire list from another
application, such as Autodesk
®
Inventor
Professional Cable & Harness.
Insert Connector from
List
AECONNECTORLIST
NOTE If the AutoCAD Electrical drawing is
missing one end of the connector or if a con-
nection was not found, wiring information is
displayed next to the pin and the information
is written into a log file so you know AutoCAD
Electrical was unable to resolve the wire con-
nections in the drawing. The log file name is
{drawing filename.LOG} and is found in the
same folder as the drawing file.
Schematic tab | 37