2011

You can now predefine other attributes on the module like the inline device
fields. For example, you want a module to have a Rack value of “2”, an
Installation value of “MACH1”, and a Rating2 value of “Hazardous Duty”. In
the spreadsheet, in the RACK column, enter
“2;INST=MACH1;RATING2=HAZARDOUS DUTY”. When this module is
generated these extra attribute values are assigned.
For More Information on page 626
Vault - Title Block Update
The project description values in Vault can now be written back to AutoCAD
Electrical drawings. Assign these values to the AutoCAD Electrical project
description values. Project descriptions can be used in the AutoCAD Electrical
title block update and the drawing list report. If the project descriptions are
out of date when these features are used, you are prompted to import the
Vault values in to the project descriptions.
3-Phase Wiring
Connecting the 3-phase wiring to the motor symbol is now automatic. When
you insert a motor symbo,l and 3-phase wiring is already present, place the
symbol on or near the wires. The wires are angled and trimmed to meet the
motor symbol.
NOTE For pre-2009 symbols, add a default attribute prompt value “X0STRETCH”
to the X0TERMxx attributes.
Flip Component
When you use the Flip Component feature, existing dashed link lines are
recalculated and reinserted if necessary.
Project Manager
You can now right-click the active project and select Close. The active project
is closed, removed from the list, and the next project becomes the active
project.
Toggle Wire Number
When you toggle a wire number from above or below the wire to an in-line
wire number, the number keeps its original center point, rather than centering
it on the wire.
What's New in 2009 Release | 23