2011

NOTE If the wire connection template contains the optional TERMn and
TERMDESCn attributes, they are inserted with the wire connection attribute
and added to the Pins section.
Others
Selecting Others on the Wire Connection Direction/Style list opens the Insert
Wire Connection dialog box. On the Insert Wire Connection dialog box you
can insert multiple wire connection attributes, select from a style other than
the default, or change the default style.
1 Define the style and direction.
2 Enter the number of wire connections.
3 (optional) Select an attribute in the Pin Information section and click
Convert. Select the text for conversion as prompted.
4 (optional) Select an attribute in the Pin Information section and click
Delete. The attribute is removed from the list and is not inserted with
the wire connection attribute.
5 (optional) Select an attribute in the Pin Information section and click
Properties to define the properties for the attribute using the Insert/Edit
dialog box.
NOTE Pin attributes added with each wire connection may differ based on
symbol type.
6 Click Insert.
7 Select the wire connection attribute insertion points. The related pin
attributes are inserted relative to the wire connection attribute based on
the wire connection template.
Insert Wire Connections
Use this dialog box to insert multiple wire connection attributes at a time or
to select a style other than the default.
Ribbon: Schematic tab ➤ Other Tools panel ➤ Symbol Builder
drop-down ➤ Symbol Builder.
Symbol Builder | 351