2011

Table Of Contents
3 Select an attribute in the grid and click the Property tool, or
double-click an attribute in the grid.
NOTE The Insert button is only available for new attributes added to the list using
the Add tool.
Inserting Wire Connections
Symbol Builder inserts a wire connection template drawing when adding a
wire connection to your symbol. The list of wire connection options is built
dynamically based on the template drawings found in the symbol library path.
1 Click Schematic tab Other Tools panel Symbol Builder drop-down
Symbol Builder.
2 Select options on the Select Symbol / Objects on page 342 dialog box.
3 Click OK to enter the block editor environment.
4 If the Symbol Builder Attribute Editor is not visible, click Symbol Builder
tab Edit panel Palette Visibility Toggle.
5 Click the arrow on the Wire Connection section of the Symbol Builder
Attribute Editor to expand the wire connection section.
6 Click the Direction/Style list to expand the list of wire connection options.
7 Select a wire connection.
NOTE Only the options for the default style are shown in the list. To see
other styles, or to change the default style, select Others.
8 Click the Insert Wire Connection tool.
9 Select an insertion point for the attribute.
350 | Chapter 5 Symbol Libraries