2011

DescriptionAttribute
Attribute for wire connection annotation for plug
side and receptacle side respectively. The "?" digit
is same as the FAMILY attribute definition.
X?WIRE01P
X?WIRE01J
Visible attribute, small, single character value (a
".") that must remain visible and must be placed
X?_TINY_DOT_DONT_REMOVE_01P
X?_TINY_DOT_DONT_REMOVE_01J
at the exact insertion location of the XnTERM01P
and XnTERM01J attributes. Maintains wire con-
nection integrity if a connector pin is moved
beyond the end of the connector shell. The "?"
digit is same as the FAMILY attribute definition.
Schematic terminal symbols
Use the following attributes for terminal symbols or multi-connection sequence
terminal symbols (default library symbol block names HT00*.dwg, VT00*.dwg,
HT10*.dwg, VT10*.dwg, HT0W*.dwg, VT0W*.dwg).
DescriptionAttribute
Attribute to carry terminal strip tag name (24 characters maximum).TAGSTRIP
Attribute for wire connection (up to four attributes positioned at each
end of the horizontal and vertical axes of the symbol with the "?" part
giving the wire connection direction digit as described previously).
X?TERM01
Optional attribute for wire connection description.X?TERMDESC01
Attribute used internally by the Terminal Strip Editor command to
sort a terminal strip.
STRIPSEQ
Attribute used internally to associate schematic terminals within one
multi-level terminal or to associate a schematic terminal to its panel
representation.
LINKTERM
Attribute to carry the terminal number assignment (24 characters
maximum). If the terminal is to display the wire number value of the
WIRENO
or TERM01
wire network that it is inserted into, then WIRENO attribute must be
present. Otherwise, if the attribute is to carry a terminal pin assign-
ment independent of the wire number, attribute TERM01 must be
used.
Schematic attributes | 315