2011

DescriptionAttribute
can carry four wire connection attributes to allow connection from
any direction. All four wire number attribute names would end with
01 to link them all to the common terminal pin number attribute.
Optional internal wire jumpers attribute that can be encoded to link
sets of terminals together so AutoCAD Electrical considers them in-
WD_JUMPERS
ternally jumpered when calculating wire number assignments and
processing wire connection and from/to reports. For example, a
WD_JUMPERS attribute value of ((01 02)) flags AutoCAD Electrical to
treat wire connection X?TERM01 as electrically jumpered to
XD?TERM02. WD_JUMPERS attribute value of ((01 04)(02 05 06))
means that wire connection X?TERM01 and X?TERM04 are treated
as internally jumpered together and X?TERM02, X?TERM05, and
X?TERM06 are viewed as jumpered together.
NOTE You can keep jumpers from displaying in Wire From/To reports
by placing the jumpers on a layer that contains the substring "JUMP-
ER."
Schematic connector parametric build symbols
The parametric connector is made up of a series of master symbols; one parent
and multiple children (default library symbol names HCN1_1*.dwg,
VCN1_1*.dwg, HCN2_1*.dwg, VCN2_1*.dwg). See the following list of
attributes for these symbol types.
Parent and Child Pin symbol attributes
(parent symbol has "1" and child has "2" as fourth character of the symbol
name)
DescriptionAttribute
(Parent only) Same as the FAMILY attribute
definition.
TAG1
(Child only) Same as the FAMILY attribute
definition.
TAG2
Same as the FAMILY attribute definition.INST
LOC
Schematic attributes | 313