2011

Table Of Contents
Vertical splice #1VSP1001.dwg
Horizontal splice #3HSP1003.dwg
Source/Destination Wire Signal Arrow Symbols
AutoCAD Electrical wire signal arrow symbols follow this convention:
The first four characters of these symbol names are either "HA?S" for source
signal arrows or "HA?D" for destination symbol arrows. The "?" character
is the arrow style digit (1 through 4 are provided in the AutoCAD Electrical
library and 5 through 9 can be user-defined).
Characters 5 through 11 can be user-defined.
You can create your own arrow styles using these unused digits (for example,
HA5S... and HA5D...). For example, copy Autodesk\Acade
{version}\Libs\jic1\ha1s*.dwg to ha5s*.dwg and Autodesk\Acade
{version}\Libs\jic1\ha1d*.dwg to ha5d*.dwg. Access each copied arrow symbols
in AutoCAD and edit to suit. Then, to access your new arrow style, set the
default arrow style to "5" in the Drawing Properties Styles dialog box.
Standalone Cross-reference Symbols:
Same naming convention as the Source/Destination Signal symbols (that is,
HA?S* and HA?D*) but without a WIRENO attribute present on the symbol.
Stand-alone PLC I/O Point Symbols
These symbols begin with "PLCIO" and can be up to 32 characters long. There
is no naming convention referenced by AutoCAD Electrical other than the
"PLCIO" prefix.
Overview of symbol naming conventions | 293