2011

Table Of Contents
Plug/Jack Connector Pin Symbols
AutoCAD Electrical connector symbols follow this convention:
The first character is "H" or "V" for horizontal wire or vertical wire insertion.
The next two characters are "C0" if the connector does not trigger a wire
number change through it. (The "0" means that the wire number does not
change, or "CN" if the connector DOES trigger a wire number change.)
The fourth character is either 1 or 2: 1 for parent marker or a 2 for child
marker.
The remaining characters are not specified.
Splice Symbols
Splices follow this naming convention:
The first four characters are "HSP1" or "VSP1" for horizontal or vertical
splices.
The fifth through seventh characters are "001", "002", "003," and so on.
Examples:
Horizontal splice #1HSP1001.dwg
292 | Chapter 5 Symbol Libraries