2011

To rename the User1- User 20 column headers, right-click the project name
in the Project Manager and select Properties. In the Project Properties ➤ Wire
Numbers dialog box, Wire Type section, click Rename User Columns. In the
Rename User Columns dialog box, specify a new column name and click OK.
Renaming of user-defined columns is project-specific. You cannot rename the
Color, Size, or Layer Name columns. All the data corresponding to the header
column can be copied, cut, and pasted to another column.
OK
NOTE This option is available only when one wire type record is selected in the
list.
Makes the selected wire type the current wire type. If the selected wire type
does not exist on the drawing, the wire layer is created on the fly. The wire
layer name and properties are saved in the drawing file. For the layer to create,
the following rules apply:
■ The layer name must be unique.
■ The layer name cannot be left blank.
■ The layer name cannot contain special characters such as / \ " : ; ? * | , = '
> <.
Optional ENV file assignment for current project
Optional ENV file assignment for current project
You can create an alternate environment settings ENV file and assign it to the
active project. Customer-specific ENV files can be created to store customer
settings, paths, libraries, and menus. For a given project, you can assign the
appropriate ENV file to the project. The ENV file name reference is saved in
the WDP drawing list file of the project. Whenever the project is selected, the
settings in the referenced ENV file are automatically restored.
Ribbon: Project tab ➤ Project Tools panel ➤ Manager.
Toolbar: Main Electrical 2
Menu: Projects ➤ Project ➤ Project Manager
278 | Chapter 4 Drawing and Project Properties