2011

BLK for color and 10AWG for size, the layer name is
filled in as BLK_10AWG based on default %C_%S
format. Placeholders are supported at any place in
the format (that is, "CUST%C-THIN%S).
Valid wire name format codes are:
■ %C = Wire Color
■ %S = Wire Size
■ %1-%5 = User 1 - User 5
Displays the AutoCAD dialog box for Layer colors
election. The Select Color dialog box highlights the
Color
color corresponding to the wire type record. The
default color for new records is white. Undefined
colors for layers use the default color while creating
the layer. Multiple selection is allowed. All wire layers
that were selected can be changed to the color.
Displays the AutoCAD dialog box for linetype selec-
tion. This Select Linetype dialog box highlights the
Linetype
linetype corresponding to the wire type record. The
default linetype for new records is continuous. Un-
defined linetypes for layers use the default linetype
while creating the layer. Multiple selection is allowed.
All wire layers that were selected can be changed to
the desired linetype.
NOTE If you need special linetypes for constructing
P&ID or point to point diagrams, load the special
linetypes from theacade.lin text file.
Displays the AutoCAD dialog box for lineweight se-
lection. The Lineweight dialog box highlights the
Lineweight
lineweight corresponding to the wire type record.
The default lineweight for new records is default.
Undefined lineweights for layers use the default
lineweight while creating the layer. Multiple selection
is allowed. All wire layers that were selected can be
changed to the desired lineweight.
Displays the Layers for Line Wires dialog box for
specifying a layer name. Click Pick to select the layer
Add Existing Layer
Use wire layers | 269