2011

Table Of Contents
Item Numbering Setup
Define the item numbering settings for the project.
Ribbon: Project tab Project Tools panel Manager.
Toolbar: Main Electrical 2
Menu: Projects Project Project Manager
Command entry: AEPROJECT
In the Project Manager, right-click the project name, and select Properties.
Select the Components tab and click Item Numbering.
Sets item numbering to either project-wide or per-
drawing. This setting controls an Item Resequence
Item Numbering Mode
and the Next>> buttons on any Insert/Edit dialog
boxes.
Per-Component Basis - allow item number assign-
ment to the main catalog part number only.
Item Assignments
Per-Part Number Basis - allow item number assign-
ment for each catalog entry on a component. It in-
cludes the main catalog part number and any mul-
tiple catalog part numbers.
NOTE Item numbers cannot be assigned to part
numbers based on ASSYCODE combinations.
Project properties: wire numbers tab
Modify your project default settings for wire numbers. All information defined
in this tab is saved to the project definition file as project defaults and settings
Ribbon: Project tab Project Tools panel Manager.
Toolbar: Main Electrical 2
Menu: Projects Project Project Manager
Command entry: AEPROJECT
Overview of project and drawing properties | 211