2011

■ Set component cross-reference display: text, graphical, or table. You can
also change the display format setup from this dialog box.
Styles
Use this tab to:
■ Change default styles for arrows, plcs, fan-in/out markers, and wiring.
■ Add or remove layers from the layer list.
Drawing Format
Use this tab to:
■ Set the default orientation, spacing, and width values for any new ladders
inserted on the drawing.
■ Specify the format referencing style: X-Y Grid, X Zones, or Reference
Numbers.
■ Set the scale factor used when inserting new components or wire numbers
on the drawing.
■ Set the tag/wire number sort order.
■ Define and manage wire and component layers.
Set project or drawing properties
You can specify settings for the project or drawing defaults, components, wire
numbers, cross-references, styles, and the drawing format using either the
Project Properties or Drawing Properties dialog boxes. The following steps are
for setting project properties. To set drawing properties, open the Project
Manager, then right-click the drawing name and select Properties ➤ Drawing
Properties, or click the Drawing Properties tool.
1 Click Project tab ➤ Project Tools panel ➤ Manager.
2 In the Project Manager, right-click the project name, and select Properties.
NOTE You can also set project properties when you create a project. Create
the project and click OK -Properties in the Create New Project dialog box.
202 | Chapter 4 Drawing and Project Properties