2011

Table Of Contents
Drawing settings include:
Drawing type and descriptions
IEC default values for the Project (%P), Installation (%I), and Location
(%L) fields
Sheet values for the sheet and drawing in addition to section or subsection
codes
Components
Use this tab to:
Specify the way new component tags are created.
Switch between sequential or line reference based tags.
Set component tag options such as using combined Installation/Location
tags or suppressing the Installation/Location tag on reports.
Display description text in uppercase.
Wire Numbers
Use this tab to:
Set the wire number format.
Switch between sequential or line reference based wire numbers.
Set wire number options such as hidden numbers, excluded numbers, or
displaying numbers on a per wire basis.
Set up wire number layer options.
Define wire number placement: above, below, or in-line.
Define wire number leaders.
Cross-references
Use this tab to:
Define the cross-reference annotation format.
Set cross-reference options such as suppressing Installation/Location codes
or using real-time signal and contact cross-referencing between drawings.
Overview of project and drawing properties | 201