2011

If some of the drawings selected for processing are unavailable (such as in a
read-only state) this dialog box appears. The file name, status, and location
of the drawing is listed in the dialog box for review.
Tries to gain full write access to the entire list of drawing files
previously selected. If you gain full access, the files are locked out
Retry Now
by you and other users cannot modify until the project-wide
command finishes.
Task (saves) all modifications in a task list to run at a later time.
The task list is maintained inside of the Project Task List database
Task
file (project_update.mdb). Not all commands can write to the
task list. See the following list of commands that can be tasked.
Cancels the update and returns to the Select Drawings to Process
dialog box. Select other files to update or try to gain write access
to the entire list of drawings to process.
Cancel
Processes the command on the drawings that are available for
editing. Changes to unavailable drawings are not saved to the
task list for later updates.
Ignore
Commands that write to the project_udpate.mdb file
■ Edit Component
■ Retag Component
■ Insert or copy a circuit
■ Edit Location box
■ Find/Edit/Replace
■ Set/Edit Wire Connection Sequence
■ Changing an IEC setting before running a Retag
■ Copy Location/Installation/Mount/Group
■ Copy BOM
■ Block Swap
■ Terminal Strip Editor
■ Insert Schematic from Panel
Files unavailable for processing | 197