2011

5 (Optional) If you are going to add the symbol to the icon menu at a later
time using the
Icon Menu Wizard on page 1231, check Icon image. Enter
the image name and folder.
6 (Optional) Click Details to see the Symbol Audit on page 359 dialog box
listing potential issues with your symbol.
7 Select OK.
8 Select Close Block Editor from the block editor toolbar.
9 (Optional) Select Yes to insert the symbol on the drawing and select a
location.
Additional Options
The additional options for creating a symbol listed are not used for this
example, but you can use them when creating your own symbol.
■ Optional Attributes: The attributes listed in this section are allowed on a
panel footprint. You can also add attributes to the Required or Optional
list using the following steps.
1 Select the Add Attribute tool to launch the Insert/Edit Attributes
dialog box.
2 Enter the attribute name as the Tag value.
3 Enter all property values.
4 Click Insert to insert the attribute or OK to add it to the list without
inserting it.
■ RATING section: You can add up to 12 Rating attributes. If the attribute
template contains a RATING1 attribute, or you add one, this section is
available on the Symbol Builder Attribute Editor.
1 Expand the RATING section.
2
Select the Add Next tool.
3 Pick an insertion point.
■ Convert Text to Attribute dialog box: If you selected existing text entities
from the Select Symbol/Objects dialog box, or added text while in the
Build your own symbols | 2103