2011

This style contains just the wire connection attributes with no graphics.
Select Others to display the Insert Wire Connections dialog box for
selecting other styles.
4
Select the Insert Wire Connection tool and insert the wire
connection attributes. The wire connection attribute, X2TERM01, and
the terminal pin attribute, TERM01, are inserted.
5 Back on the Symbol Builder Attribute Editor, expand the Wire Connection
list and select Bottom/None.
6
Select the Insert Wire Connection tool and insert the wire
connection attributes. The wire connection attribute, X8TERM02, and
the terminal pin attribute, TERM02, are inserted.
Finishing the one-line parent symbol
1 Click Symbol Builder tab ➤ Edit panel ➤ Done.
2 Click Base Point: Pick point and select the center of the symbol.
3 Select Wblock. Wblock creates the symbol .dwg file, while Block creates
the symbol for this drawing file only.
4 Enter the Name and file path or keep the default. AutoCAD Electrical
provides a default name for the new symbol based on the attribute
template selected. Avoid changing the first four letters of the file name
and limit the total length to 32 characters.
NOTE One-line symbols follow the same naming convention as schematic
parent and child symbols. For convenience the one-line symbols provided
have a “1-” suffix. However, the symbol name does not define the symbol
as a one-line symbol.
5 (Optional) If you are going to add the symbol to the icon menu at a later
time using the
Icon Menu Wizard on page 1231, check Icon image. Enter
the image name and folder.
6 (Optional) Click Details to see the Symbol Audit on page 359 dialog box
listing potential issues with your symbol.
Build your own symbols | 2097