2011

7 Insert the attribute above the rectangle.
8
Select WIRENO, click the Insert Attribute tool, and insert it above
TAGSTRIP. Use the Properties tool to change it to Justify = Center.
9 Select MFG, CAT, and ASSYCODE. Click the Insert Attribute tool, and
insert them near the center of the rectangle.
NOTE If the CAT and ASSYCODE attributes are not listed they are inserted
with MFG as a group.
Add wire connection attributes
You can define wire connection points for the library symbol. When you add
a wire connection, you select the style and the direction the wire connects
from. In this exercise, wire connection attributes are inserted at the left, right,
top, and bottom of the terminal so that it can be inserted in either horizontal
or vertical wires.
1 If the Symbol Builder Attribute Editor is not visible,
Click Symbol Builder tab ➤ Edit panel ➤ Palette Visibility Toggle.
2 Expand the Wire Connection section of the Symbol Builder Attribute
Editor.
3 Select Left/None.
NOTE If the default terminal style is not None, select Others and change the
default style to None. This wire connection style contains attributes only.
2092 | Chapter 24 Advanced Productivity