2011

9 Select DESC1, click the Insert Attribute tool, and insert it below
TAG1.
10 Repeat to insert the INST and LOC attributes above TAG1.
11 Select MFG, CAT, and ASSYCODE. Click the Insert Attribute tool, and
insert them near the center of the rectangle.
NOTE If the CAT and ASSYCODE attributes are not listed they are inserted
with MFG as a group.
12 Repeat to insert the FAMILY attribute near the center of the rectangle.
13
With FAMILY still highlighted in the Symbol Builder Attribute
Editor, select the Properties tool. Enter “PS” as the Value and OK. This
assigns the %F value to the FAMILY attribute inserted.
Add wire connection attributes
You can define wire connection points and terminal text for the library symbol.
When you add a wire connection, you select the style, the direction the wire
connects from, and whether to include the optional TERMxx and TERMDESCxx
attributes. In this exercise, wire connection attributes are inserted at the left,
bottom, and right side of the symbol.
1 If the Symbol Builder Attribute Editor is not visible,
Build your own symbols | 2085