2011

There are about two dozen symbols (with a file name "HP?*.dwg" where
"?" is the style number) associated with each style in the library folder.
To create a style, copy an existing style's symbols to one of the unused
style numbers (6-9) and edit each library symbol.
Library folder:
Windows XP: C:\Documents and Settings\All
Users\Documents\Autodesk\Acade {version}\Libs\{library}\
Windows Vista, Windows 7: C:\Users\Public\Documents\Autodesk\Acade
{version}\Libs\{library}\
3 Specify the module box dimensions for the selected style.
These values set the right, left, top, and bottom offsets for the rectangle
that surrounds the module. The optional Split Top and Split Bottom
specify the offsets for a split module where Split Top specifies the offset
for the top of a split module and Split Bottom specifies the offset for the
bottom of the split module. If left blank, the rectangle Top and Bottom
values are used.
4 Specify any properties for the lines that make up the box. You can set
the color and linetype using the properties fields. To predefine the color,
enter "COLOR colorname" into the box. For linetype, enter "LTYPE
linetypename" in the box.
5 Click OK.
Modifying the terminal block settings
The Terminal Block Settings dialog box is used to manage the library symbols
in the PLC Database File Editor. You can add a terminal to the list by clicking
in any box in the last entry of the list. A blank entry line is added to the bottom
of the list. You must define the block name, assign it to a terminal category
for selection, give it a description, and assign a bitmap to be used for dialog
box appears.
The list shows the block name, category, unique description, and sample
bitmap file for each terminal type.
As defined when creating the parametric PLC blocks. Block
file names adhere to the naming conventions to identify
Block Name
the PLC style numbering in the third position and the ori-
entation in the first position.
Use the PLC Database File Editor | 2001