2011

NOTE You can select multiple fields to edit at the same time by dragging
your mouse across contiguous fields or by holding down the Control key
while selecting non-contiguous fields.
5 In the Select Terminal Information dialog box, select the Input category
and look at the available terminals.
6 Select the Input I/O Point Wire Left terminal and click OK.
All seven terminals are assigned at the same time.
7 In the PLC Database File Editor dialog box, right-click on the last terminal
and select Edit Terminal.
8 In the Select Terminal Information dialog box, select the Terminal
category.
9 Click the Terminal Point Wire Right terminal and click OK.
As an alternative to the Select Terminal Information dialog box, you can use
the drop-down list of predetermined Terminal Types. Click the arrow for the
Terminal Type and select from the list of available terminal types.
Use the PLC Database File Editor | 1999