2011

Pause the mouse over 9PB - 12 PB. The text, wire connection attributes,
and description text all highlight. We still must convert the wire number
text and add the geometry to our block.
4 Click Schematic tab ➤ Edit Wires/Wire Numbers panel ➤ Create/Edit
Wire Type.
5 In the Create/Edit Wire Type dialog box, select Make all Lines Valid Wires
and click OK.
6 Click Conversion Tools tab ➤ Tools panel ➤ Convert Text to Wire
Number.
7 Respond to the prompts as follows:
Select LINE near wire number text:
Select the left endpoint of the wire with the text 13 above it (line 401)
Select existing wire number text to convert: Select text 13
8 While you are still in the command, repeat for text 14 - 16 on lines 403
- 407.
9 Right-click to exit the command.
1940 | Chapter 23 Tutorials