2011

2 Respond to the prompts as follows:
Select objects: Select 9PB, 10PB, 11PB, and 12 PB, right-click
NOTE You may have to right-click several times to exit the command.
The text changes color to indicate that it has been tagged. The color of
the TAG attribute is by layer. The attribute is the same layer as defined
on the WD_M block. You can now link the descriptions and wire numbers.
3 Click Reports tab ➤ Schematic panel ➤ Reports.
4 In the Schematic Report dialog box, specify:
Report Name: Component
Active Drawing
Click OK.
5 If asked to save the drawing, click Yes.
In the Report Generator dialog box, notice that 9PB-12PB are listed in
the TAGNAME column of the report
6 In the Report Generator dialog box, click Close.
Linking Schematic Attributes
Use the AutoCAD Electrical Linking tools to associate non blocked text to
previously placed template blocks. Through the modification of a template
block, you have control over which attributes are inserted and visible. All
necessary attribute definitions are placed using the properties of the existing
text entities, such as justification, height, and location. If multiple template
block files are selected, the value of the text is added to the previously defined
template block attributes as hidden attributes and the text is not removed.
Linking Results:
■ The selected text entities are replaced with an AutoCAD Electrical attribute.
■ Colors change to distinguish what has been already converted as defined
in the WD_M block.
■ Temporary lines display the link.
Linking Schematic Attributes | 1935