2011

Set up wire layers
1 Click Schematic tab ➤ Edit Wires/Wire Numbers panel ➤ Create/Edit
Wire Type.
2 In the Create/Edit Wire Type dialog box, click in the Wire Type #2 row
and specify:
Wire Color: RED
Size: 25
The Layer Name is automatically created. The name RED_25 is assigned
to the wire layer you are creating.
3 Click Color.
4 In the Select Color dialog box, select red and click OK.
5 Click Linetype.
6 In the Select Linetype dialog box, select Continuous and click OK.
7 Click Lineweight.
8 In the Select Lineweight dialog box, select 0.30 and click OK.
For this example, create three more wire types using the Create/Edit Wire
Type dialog box.
9 In the Create/Edit Wire Type dialog box, specify:
Wire Type #3
Wire Color: RED
Size: 10
Color: Red
Linetype: Hidden2
Lineweight: default
Wire Type #4
Wire Color: GREEN
Size: 10
Color: Green
1914 | Chapter 23 Tutorials