2011

to (T= wiretype):
Drag the wires to the right,
to Point (Continue/Flip):
Drag up the wires towards PJ3 on Black Box 3, enter C, and press ENTER (to
continue and lock the drag)
to (Continue/Flip):
Drag the wires to the right and connect to pins B-D on PJ3
11 Click Schematic tab ➤ Insert Wires/Wire Numbers panel ➤ Multiple Bus.
12 On the Multiple Wire Bus dialog box, click OK to use the previous settings.
13 Respond to the prompts as follows:
Window select starting wire connection points:
Select pins 13-15 on Black Box 1 and press ENTER
to (T= wiretype):
Drag the wires to the right,
to Point (Continue/Flip):
Drag the wires down towards PJ4 on Black Box 4, press C, and press ENTER (to
continue and lock the drag)
to (Continue/Flip):
Drag the wires to the right and connect to pins B-D on PJ4
1882 | Chapter 23 Tutorials