2011

5 Click Schematic tab ➤ Insert Wires/Wire Numbers panel ➤ Insert Wire
Numbers drop-down ➤ Wire Numbers.
6 In the Sheet 4 - Wire Tagging dialog box, click Pick Individual Wires.
7 Respond to the prompts as follows:
Select objects:
Select the wire segment between the two push buttons on line reference 403 (1),
right-click
The wire number is placed.
Add wire numbers to the entire drawing
1 Click Schematic tab ➤ Insert Wires/Wire Numbers panel ➤ Insert Wire
Numbers drop-down ➤ Wire Numbers.
2 In the Sheet 4 - Wire Tagging dialog box, click Drawing-wide.
Wire numbers are assigned to each segment in your drawing.
1836 | Chapter 23 Tutorials