2011

Renames the selected drawing directly in the drawing list.Rename
Assigns, edits, and removes section and subsection coding
for a drawing. Assigns drawing descriptions to the drawing
files.
Drawing Properties
Applies project settings to new drawing files where the
project default settings for the drawings were not applied
at creation time.
Apply Project Defaults
Copies the drawing settings and options from one drawing
to one or more drawings.
Copy
NOTE Drawing-specific information (found on the Drawing
Properties ➤ Drawing Settings tab) cannot be copied from
one drawing to another.
Applies the copied drawing settings and options from one
drawing to the selected drawings.
Paste
Displays differences between all drawing settings and their
associated defaults in the project definition file.
Settings Compare
(you must be logged into the vault) Adds a file to the vault
and creates a version of the file. The first time drawing file
Check In
is checked in, the project definition file is checked in at the
same time. The project definition file is vaulted first to es-
tablish a location in the Vault database.
(you must be logged into the vault) Reserves and locks the
master drawing file. Retrieves an updated copy, if necessary.
Check Out
Checks out the drawing files when the project file is under
Vault control.
(you must be logged into the vault) Removes the reserva-
tion/lock from the master drawing file. The master file is
Undo Check Out
now available for others to check out. Any modifications
made to the local copy are not checked back into the vault.
(you must be logged into the vault) Retrieves the latest
master copy from the vault and copies it into your working
Get Latest
folder. The status indicator displaying a red background
indicates older files.
About collaborative design | 165