2011

You can associate a schematic and panel terminal automatically by:
■ Click Panel tab ➤ Terminal Footprints panel ➤
➤ Insert
Terminals drop-down ➤ Insert Terminal (Schematic List).
■ Click Schematic tab ➤ Insert Components panel ➤ Insert Components
drop-down ➤ Terminal (Panel List).
For multi-level terminals, the Insert Terminal (Schematic List) tool shows only
one terminal for insertion regardless of how many schematic terminal
symbols/levels there are for that multi-level block. The Insert Terminal (Panel
List) tool shows one terminal for each level for insertion.
NOTE Panel terminals inserted by the Terminal Strip Editor are automatically
associated to the schematic representation.
You can click the Associate terminals on page 1055 tool to select terminals to
associate or click Add/Modify on the Panel Layout - Terminal Insert/Edit dialog
box to add the panel terminal to an association with a schematic terminal on
any drawing in the project.
Insert terminals
Insert terminals
1 If AEGS is not the active project, in the Project Manager, right-click AEGS
and select Activate.
2 In the Project Manager, double-click AEGS to expand the drawing list.
3 In the Project Manager, Project Drawing List, double-click AEGS05.dwg.
4 Click Schematic tab ➤ Insert Components panel ➤ Multiple Insert
drop-down ➤ Multiple Insert (Icon Menu).
1822 | Chapter 23 Tutorials