2011

Table Of Contents
The Circuit Configuration dialog box displays. Notice that some circuit
elements have a (2) prefix. These elements make up the second circuit
in the dual circuit.
6 In the Circuit Elements section, select Load Setup.
7 In the Setup & Annotations: Load Setup section, select the Browse
button.
The Select Load dialog box displays.
8 Select Type: Transformer, Voltage (V): 480, and Phase: 3.
9 Select an entry from the grid and click OK.
10 Continue selecting Circuit Elements for the first circuit:
Load: Generic box
Disconnecting means: None
Terminal strip or connector: Square
Cable marker: None
11 In the Circuit Elements section, select (2) Load Setup.
1798 | Chapter 23 Tutorials