2011

Table Of Contents
7 In the Write Block dialog box, enter a name for the saved circuit. Take
note of the location where the drawing file is being saved.
8 Click OK.
Inserting a WBlocked circuit
1 Click Schematic tab Insert Components panel Circuit
drop-down Insert WBlocked Circuit.
2 In the Insert Wblocked Circuit dialog box, browse to the folder containing
the circuit you saved.
3 Select the WBlocked motor circuit, and click Open.
4 In the Circuit Scale dialog box, select:
Move all lines to wire layers
Keep all source arrows
Update circuits text layers as required
Click OK.
5 Respond to the prompts as follows:
Specify insertion point: Select any blank spot on your drawing
The parent component tags that are not set to Fixed automatically retag
based on the insertion point. It is like the behavior when inserting a
circuit using the icon menu method.
6 Delete the circuit.
Insert a saved circuit using WBlock | 1791