2011

4 On the Save Circuit to Icon Menu dialog box, click Add ➤ New circuit.
5 On the Create New Circuit dialog box, specify:
Name: Motor starter circ
Image file: Active and Create PNG from current screen image
File name: UserCirc2
Click OK.
6 Respond to the prompts as follows:
Base point: Select the left-most wire connection point at line reference 422
Select objects:
Window around the circuit from left to right to capture all the components and
wiring, but exclude the vertical bus, press ENTER
7 On the Save Circuit to Icon Menu dialog box, click OK.
Insert a circuit you saved for reuse
1 Pan to display the blank area between line references 426 - 432.
2 Click Schematic tab ➤ Insert Components panel ➤ Circuit
drop-down ➤ Insert Saved Circuit.
3 In the JIC: Saved User Circuits dialog box, select the Motor starter circ
button.
4 In the Circuit Scale dialog box, click OK.
1786 | Chapter 23 Tutorials