2011

Select the left-most wire connection point where the circuit ties into the left-hand
vertical bus wire
Select objects:
Window around the circuit from left to right to capture all the components and
wiring, but exclude the vertical bus, press ENTER
7 On the Save Circuit to Icon Menu dialog box, click OK.
The circuit is saved to your AutoCAD Electrical user folder. It can be
quickly accessed from the Insert Component icon menu or from the
Insert Saved Circuit tool.
The new motor has a 3-pole motor contactor child reference but there is not
a parent motor starter relay coil to operate it. The motor start coil circuit must
be added on a control schematic in the project drawing set and linked back
to the new motor circuit.
Insert motor start coil circuit to control schematic
1 Open AEGS04.dwg.
2 Zoom on the upper-right hand ladder column so the full circuit on line
reference 422-423 displays.
3 Click Schematic tab ➤ Edit Components panel ➤ Circuit
drop-down ➤ Save Circuit To Icon Menu.
Save and insert a circuit | 1785