2011

This circuit has component tags
■ “FU215” on the 3-pole fuse
■ “215CBL” on the multi-conductor cable
■ “DS215” on the disconnect switch
■ “MOT216” on the motor
5 Click Schematic tab ➤ Edit Components panel ➤ Circuit
drop-down ➤ Move Circuit.
6 Respond to the prompts as follows:
Select Objects:
Window select the circuit on line reference 215 to capture the connection wire
and dots that tie in to the vertical bus, right-click
Press F9 to turn on SNAP .
Specify base point or displacement:
Select a base point and then select a point on line reference 214
The circuitry is moved, the affected components are retagged, and
cross-references are updated based on the new line reference. Each of the
listed parent component tags decrement by one. For example, fuse FU215
became FU 214.
1772 | Chapter 23 Tutorials