2011

Copy all files located inPrerequisites:
Documents and Settings\{username}\My Documents\Acade {version}\Aedata\Tutorial\Ae-
gs\Circuits
Windows XP
to
Documents and Settings\{username}\My Documents\Acade {version}\Aedata\Proj\Aegs
Users\{username}\Documents\Acade {version}\Aedata\Tutorial\Aegs\CircuitsWindows Vista,
toWindows 7
Users\{username}\Documents\Acade {version}\Aedata\Proj\Aegs
You learn to:
■ Move a circuit
■ Insert a circuit using Circuit Builder
■ Save and insert a saved circuit
■ Insert a saved circuit using WBLOCK
Move an existing circuit
When you move a circuit, most of the parent components contained in the
circuit automatically retag since the drawing is set up for reference-based
component tagging. In the process of moving the circuit, you change the
reference locations of the moved components. Related child components
update to match the new parent tags, including references on other drawings
in the project.
NOTE Tagging updates vary depending on your default tagging configurations.
Move the location of a circuit
1 If AEGS is not the active project, in the Project Manager, right-click AEGS
and select Activate.
2 In the Project Manager, double-click AEGS to expand the drawing list.
3 In the Project Manager, Project Drawing List, double-click AEGS02.dwg.
4 Zoom in on the lower left corner of the drawing. Make sure the 3-phase
motor circuit at line reference 215 is visible.
Move an existing circuit | 1771