2011

7 Click Color in the Layer section. Select blue and click OK.
NOTE If you want the new wire layer to be the default, click Mark Selected
as Default.
8 Click OK.
Changing a wire layer assignment
When a wire is inserted, the wire ends up on the first valid wire layer as defined
in the Drawing Properties dialog box. You can place wires on different wire
layers. You can use the AutoCAD
®
PROPERTIES command to move a wire to
the correct layer or you can use the Wire Layer utility.
Change wire layer assignments
1 Zoom in on the upper left corner of the drawing.
2 Click Schematic tab ➤ Edit Wires/Wire Numbers panel ➤ Modify Wire
Type drop-down ➤ Change/Convert Wire Type.
The Change/Convert Wire Type dialog box lists all the valid wire layers
that are defined for the active drawing. The wire layer name and the wire
properties like color, size, and user-defined properties are listed in the
grid. An “X” in the Used column indicates the layer name is currently
being used.
3 Select RED_18AWG.
The wire type highlights in blue in the dialog box indicating that it is
the wire type to change.
Changing a wire layer assignment | 1769