2011

16 In the Insert/Edit Component dialog box, Description section, specify:
Line 1: MASTER CONTROL
Line 2: RELAY
Up to three lines of description text can be entered as a description for
components. If the third description line is unavailable, the symbol does
not carry an attribute for a third line of description.
NOTE You can specify a description by entering text or by clicking Defaults
to select from a list of standard component descriptions.
17 In the Insert/Edit Component dialog box, Location code section, click
Drawing.
AutoCAD Electrical does a quick read of the drawing file and returns a
list of all location codes used so far.
18 In the All Locations - Drawing dialog box, select MCAB5 and click OK.
NOTE You can also include an external “LOC” location list in the project
“LOC” list to help with consistency. To use this feature, create a file called
default.loc and put it in an AutoCAD Electrical search directory. The format
for this text file is each location on its own line in the file with no leading
spaces. You can also create a project-specific file by naming it the same as
your project but with a .loc extension.
19 In the Insert/Edit Component dialog box, the pin values are inserted
based on the selected catalog number:
Pins: 1: K1
Pins: 2: K2
Inserting components | 1749