2011

5 In the Create New Drawing dialog box, click OK.
NOTE You could click OK-Properties to display the Drawing Properties dialog
box. This dialog box has options like the options found in the Project
Properties dialog box. It defines drawing-specific settings that are maintained
inside the WD_M block of the drawing.
6 In the Project Manager, double-click the project name (AEGS) to display
the drawing files. AEGS11 is the only file in the list.
Add drawings to the project
1 In the Project Manager, right-click AEGS, and select Add Drawings.
2 In the Select Files to Add dialog box, select drawings AEGS01.dwg to
AEGS10.dwg and click Add.
3 When asked whether to apply the project default values to the drawing
settings, click Yes.
The Project Manager lists the files under the AEGS folder. New drawings
that you add from this point on are added at the end of the drawing
order. You now have access to the files required for the exercises in this
book.
1704 | Chapter 23 Tutorials