2011

Displays the duplicated cable and wire id for the active
project. The report lists the duplicated cable tags or cable
Cable Exception
tags with duplicated wire id, error message, reference of
the cable tag, and the drawing where the error occurs.
Displays components with no bill of material part assign-
ments. The report lists the component reference designa-
Component - No Catalog Number
tion tag, component category, reference of the component
tag, error message, and the drawing where the error occurs.
Displays the duplicated components. The report lists the
component reference designation tag, component cat-
Component Duplication
egory, reference of the component tag error message, and
the drawing where the error occurs.
Displays component connections with no connected wires.
The report lists the component reference designation tag,
Component - No Connection
component category, reference of the component tag, error
message, and the drawing where the error occurs.
Displays components in the wire network that carry a
mixture of different WDTYPE on page 325 attribute values.
Mixed Component Network
For example, a one-line symbol (WDTYPE value of “1-”)
connected to a schematic symbol (WDTYPE value missing
or blank).
Displays duplicated schematic terminal numbers. The report
lists the terminal tag id and duplicated terminal number,
Terminal Duplication
reference of the terminal number, error message, and the
drawing where the error occurs.
NOTE Terminal numbers listed in WDN files (located in
the same folder as the project definition file (*.wdp)) are
not checked for duplications. You can use wildcards to ex-
clude a range of terminals for duplication checking using
this text file.
Displays duplicated component pin assignments. The report
lists the schematic component reference designation tag
Pin Exception
and component wire connection pin, reference of the
component tag, error message, and the drawing where
the error occurs.
Overview of real-time error checking | 1691