2011

Table Of Contents
Inserts the icon using a vertical or horizontal orientation. This
value is opposite the default ladder rung orientation for the
drawing.
Vertical/Horizontal
Turns off the Insert/Edit Component dialog box when inserting
symbols onto the drawing. To add component detail later, click
the Edit Component tool, and select the component to edit.
No edit dialog
Inserts the component, untagged (that is, without assigning a
unique Component Tag). The untagged value that displays is the
No tag
TAG1/TAG2 default value for the component. To add component
detail later, click the Edit Component tool, and select the com-
ponent to edit.
Indicates to display the previously used menu each time you open
the Insert Component dialog box. For example, if you insert a
Always display previously used
menu
push button from the Push Buttons menu, the next time you
open the Insert Component dialog box the Push Button menu
displays by default.
Specifies the component block insertion scale. This defaults to
the value set in the Drawing Properties Drawing Format dialog
Scale schematic
box. Once set, this value is remembered until reset or until the
drawing editing session ends.
Specifies the footprint insertion scale. This defaults to the value
set in the Drawing Properties Drawing Format dialog box.
Scale panel
Once set, this value is remembered until reset or until the drawing
editing session ends.
Manually type in the component block to insert.Type it
Browses to and selects the component to insert.Browse
Right-click menus
Options for the Menu tree structure view
Right-click on the main menu or submenu in the Menu tree structure view
to display the following options:
Expand/Collapse: Toggles the visibility of the menus.
Overview of pneumatic tools | 1673