2011

Makes the selected text entities an attributed
block file with the TAGSTRIP and WIRENO attrib-
Tag Schematic Terminal -
Wire Number
ute visible. The template block file
(HT0W_CONVERT.DWG or VT0W_CON-
VERT.DWG depending on the drawing proper-
ties) contains attributes used for a terminal block
component containing a wire number as the
terminal number.
Makes the selected text entities an attributed
block file with the TAGSTRIP and TERM01 attrib-
Tag Schematic Terminal -
Wire Number Change
ute visible. The template block file (HT1T_CON-
VERT.DWG or VT1T_CONVERT.DWG depending
on the drawing properties) contains attributes
used for a terminal block component that
changes the wire number. It creates a terminal
number block that has a different wire number
for each wire connected to it.
Tag panel
Use these tools to convert text entities into an attributed block file. Through
the insertion of a template block, you have control over which attributes are
inserted and visible. All necessary attribute definitions are automatically placed.
During the tagging process, the text entity is removed and replaced with a
template block file that contains multiple attributes used in AutoCAD Electrical.
Click Conversion Tools tab ➤ Panel panel. Select one of the panel tagging
commands from the list.
Click any of the tagging tools. Select the text entity to replace with the
component TAG1 template block file and right-click to apply the tag.
Makes selected text entities an attributed block
file with the P_TAG1 attribute visible. The tem-
Tag Panel Component
plate block file (ACE_P_TAG1_CONVERT.DWG)
contains attributes for a panel component.
Makes selected text entities an attributed block
file with the DESC1-3 attributes visible. The
Tag Nameplate
template block file (ACE_NP_CONVERT.DWG)
contains attributes used in nameplate symbols.
If the description text strings were previously
defined as attributes on an AutoCAD Electrical
1656 | Chapter 21 Conversion Tools